CFL Series – PL

Cable Fault Pre Locators: CFL PL Series

CFL PL Series, Cable Fault Pre-Locators from SCOPE are the ultimate solution for locating underground cable faults in minimum time.
  • Measuring range up to 256Km
  • Large LCD display
  • Simple & User friendly operation
  • Adjustable balance of instrument resistance to suit the cable under test
  • Adjustable gain for optimal waveform resolution
  • Large range of Propagation Velocity enables testing of all type of cables including pilot and telecoms cable
  • Facility to store & compare waveforms
  • Housed in rugged, IP67 class moulded case

TECHNICAL DATA

Full Product Specifications

ParametersCFL PL2CFL PL3CFL PL2+CFLPL3+CFL PL4+
TDR✓✓✓✓✓
ICM / ICE✓✓–✓✓
SIM / MIM / ARC–✓✓✓✓
Decay–––✓✓
Bridge–––––
Sampling Rate (MHz)100100100800800
Measurement Range16km50km128km256km
Pulse Width (nS to μS)40 – 3.5610 – 100
VoP Range (m/μs)100-300
Display Size5”5.7”10.4”
Display TypeMonochromeColour

Related Products

Multifunctional analyzer EVSE-100 is an instrument dedicated to diagnostics of electric vehicle charging stations and cables. Using a single device, we will perform a set of tests on these objects, ending with the generation of a professional report. Through appropriate simulation of CP and PP circuits, the meter can put the station into various operating states. This allows us to verify the correctness of the control system and perform measurements in the field of electric shock protection. We can complete the verification of functionality and safety by simulating errors on the power supply side, i.e. the charging station (ICCB), and charging side of the vehicle (CP circuit)
HISAC Ultima – new generation Circuit Breaker Dynamic Test Set from SCOPE …. The ultimate solution for testing Circuit Breakers of all types. HISAC Ultima is the most complete analyser for checking the dynamic performance of CBs in live EHV switchyards upto 765 kV.HISAC Ultima can carry out Dynamic Contact Resistance Measurement on SIX breaks of THREE poles in one operation thereby significantly reducing stress on CB & testing downtime.HISAC Ultima with DCRM+ ensures end users safety by providing Dual Earth Test, in which Circuit Breaker will be grounded from both sides while conducting the test.It offers flexibility to create pre-programmed Test Plans including all test settings for all types of circuit breakers available in a switchyard that can simply be recalled at the time of actual testing. This saves you from doing all settings in switchyards.The Analysis software offers a range of utilities which enables effective Condition Monitoring of CB by comparing present test data with previous signatures and predicting future performance.
SCOPE’s Single Phase (TTRM 101 / TTRM 102) and Three Phase (TTRM 301 / TTRM 302), Transformer Turns Ratio Meters are rugged yet light weight and highly reliable instruments to measure turns ratio of transformers in live switchyards up to 765kV.TTRM is equally suitable for use on manufacturing shop floor and test laboratories. It can be used for testing of single / three phase power transformers (star or delta connected, with or without neutral), CTs and PTs.
SCOPE offers its hugely popular CRM series Contact Resistance Meters,CRM 100B/100B+, CRM 200B/200B+ and CRM 100C in all new super-light avatars. The Plus (+) series is based on cutting-edge ultra capacitor technology.CRM directly measures micro-ohm values at 100A / 200A DC under live EHV / UHV switchyard conditions quickly & accurately.