Facebook Instagram Youtube Envelope
  • +603-6141 8364
  • info@shamawar.com.my
  • Kota Damansara, Selangor
Get Quote
EXIMPROD MV FUSES
EXIMPROD MV FUSES - Image 2

EXIMPROD MV FUSES

The high-voltage back-up current-limiting fuse-links are designed for protection of systems which include transformers, against the destructive results of short-circuits and overloads, by limiting the thermal and electrodynamic effects of the short-circuit currents. The CNC fuse-links are complying with the industry standards – IEC 60282-1, DIN 43625 and IEC 60787 – and can be used both in outdoor and indoor applications.

TECHNICAL DATA

Full Product Specifications

  • High breaking capacity – 50 kA
  • Limitation of the short-circuit currents at low levels
  • Low power dissipation – more energy savings and less heating
  • Reliable interruption of the critical currents
  • Minimum breaking current is relatively low < 4xIn
  • Low switching voltage – lower than 60 kV
  • Low level of the cut-off current
  • Unlimited lifetime
  • Same design for both indoor and outdoor usage
  • Reliable proofing against humidity penetration of the fuse-link interior
  • Highly qualitative raw materials and components.

Related Products

PH4 Arrester (420 kV Rated, 17480 mm Creep , BB Hardware) Station High

IEC Station High / High Quality Polymer Housed Hollow Core Surge Arrester

  • IEC silicone Station High class arrester
  • IEEE 693 High Performance Qualification
  • High quality MOV discs made in Wadsworth, Ohio since 1978
  • Arresters assembled in Aiken, South Carolina
  • 100% routine tested
View Specifications

Switches & Fuses

The design of SDF units type IN1 is based on the innovative QUAD BREAK’ principle. This design enables a drastic reduction in the intensity of arc, which is produced at the time of breaking. During breaking the current path is broken at four places in series, thus the arc is reduced. This leads to less strain on the contacts and the life of the switch is increased.The moving contacts are designed to make two parallel current paths, which produce high electro-magnetic attraction forces during high faults and increase the contact pressure, this eliminates chance of arcing at the contacts and allows the fuse to safely clear the fault. The self-cleaning contacts ensure wiping of deposits during each operation and increase the life of the contacts. Telescopic shaft feature enables the operating shaft extension up to 25mm.
View Specifications

SVNR Arrester (335 kV MCOV) Substation (IEEE)

IEEE Station Class Polymer Housed Surge Arrester, IEEE Energy Class H

IEEE Polymer station class high energy surge arrester for substation applications

  • High strength, high energy (Class H) station arrester for system voltages 161kV and above
  • IEEE 693 High Performance Qualification
View Specifications

Battery Charger

Industrial heavy duty constant current limiting thyristor controlled Rectifier/ Battery Charger are designed for all applications requiring DC Power Supply.Output rating: 24/30/48/110/220 VDC and 3Amps – 1200Amps.TPU series are single-phase and three-phase industrial battery chargers, specifically designed and customised to supply constant DC voltage to critical loads, and may recharge any types of rechargeable batteries like nickel cadmium or sealed lead-acid battery.The TPU series, single-phase/three phase rectifiers, employ 6-pulse/ 12-pulse thyristor bridge, fully controlled by PCB board.
View Specifications