Facebook Instagram Youtube Envelope
  • +603-6141 8364
  • info@shamawar.com.my
  • Kota Damansara, Selangor
Get Quote
CFL Series - SG

CFL Series – SG

Cable Fault Locator

SCOPE offers CFL Series, Cable Fault Locator Test System, the ultimate solution for locating all types of underground cable faults in minimum time, thus saving long outages and consequential revenue loss & inconvenience.SCOPE offers a full range of products required for fault location of LT/HT power and telecom cables. It includes various models of Surge Generators (Thumpers), Pre-Loca-tors, Pin-Pointers, SIM Filters and Audio Generators.The utility of Surge Generators can be further enhanced by optional in-built features like DC Hi-pot, Burn Down and Sheath Fault Locator.Appropriate models can be chosen and product configuration can be optimized based on application.Various constituent models of Cable Fault Locator Test System are:Surge Generator (Thumper): CFL SG 1605 / 1610 / 1620 / 3210 / 3215 / 3220 Pre Locator: CFL PL2 / PL2+ / PL3 / PL3+ / PL4+Pin Pointer cum Route Tracer: CFL PP3 / PP3+ Audio Generator: CFL AG2SIM Filter: CFL SIMFCable Identification System: CFL CIS Soft Discahrge Rod: CFL DDR seriesCable Fault Surge Generator: CFL SG SeriesCFL SG Series offer voltages up to 16kV / 32kV and energy up to 2000J.
  • Compact, rugged design
  • Key-lock Switch to restrict unauthorized operation
  • Variac Zero, HV Switch & Output Plug Interlock for HV circuit
  • Over-heat Protection at 70°C
  • DC Test System (Hi-Pot, Burn Down & Sheath Fault)
  • Over-current Trip – in DC Test System
  • Earth Indication Emergency Off

TECHNICAL DATA

Full Product Specifications

ParametersCFL SG 1605 / SG 1610 / SG 1620CFL SG 3210 / SG 3215 / SG 3220
Output Voltage Range0-4, 0-8, 0-16kV0-8, 0-16, 0-32kV
Output Energy500J / 1000J / 2000J1000J / 1500J / 2000J
Impulse Period SequenceSingle Impulse / 3S / 6S / 9S or other as desired
Fault Distance Measurement

Modes Supported

ICM (Impulse Current Method), SIM (Secondary Impulse Method)
Output IndicationMoving Coil Meters
Power230V AC ±10%, 50/60Hz
HousingElegant, rugged aluminium housing Or mounted on optional trolley
Dimensions532 X 422 X 654 mm700 X 700 X 900 mm
Weight (approx.)55 kg / 60 kg / 65 kg95 kg / 105 kg / 115 kg
Optional ‘DC Hi-Pot’ Mode
DC Hi-Pot RangesVoltage: 0–32kV, Current: up to 24mA
Optional ‘Burn Down’ Mode
DC Burn Down RangesVoltage: 0-8, 0-16, 0-32kV, Current: 0-240, 0-120, 0-60mA
Optional ‘Sheath Fault Locator’ Mode
DC Sheath Fault RangesVoltage: 0-8kV, Current: 0-240mA

Test Timing Intervals: Single Impulse, 3S / 6S / 9S or other as desired

Related Products

PD Analyser

This is an ‘All in One’ solution for detection, analysis & localisation of partial discharges in the insulation of high-voltage Transformers, Cables, GIS, Generators and Motors.The PD Analyser is an extremely useful device for condition estimation of high-voltage insulation. This multi-purpose device is designed for
  • Partial discharge measuring in high-voltage insulation at a high noise level
  • PD detection & identtification of various types of defects for effective insulation condition estimation
View Specifications

CFL Series – PL

CFL PL Series, Cable Fault Pre-Locators from SCOPE are the ultimate solution for locating underground cable faults in minimum time.
View Specifications

Prima Series

Prima Series is designed for Primary Current Injection Testing of Current Transformers, Protection Relays & Circuit Breakers during their Factory Test, Commissioning and Routine Testing. It is also used to test the Turns Ratio of Current Transformers and for other applications that require variable high currents. The Kit is designed for most optimal use of man and machine and is suitable to work in live switchyard conditions. Prima consists of a Control Unit and a low weight Loading Transformer, enabling the user to take the Loading Transformer nearest to the CT terminal. Thus, the weight of both the output lead and overall kit reduces considerably. The innovative design of Prima gives the ultimate flexibility to the user to use the full capacity of the Loading Transformer by adjusting the output voltage and current as per requirement.
View Specifications

HISAC Ultima

HISAC Ultima – Circuit Breaker Dynamic Test System from SCOPE. The ultimate solution for testing Circuit Breakers of all types. HISAC Ultima is the complete analyser for checking the dynamic performance of circuit breakers in live EHV switchyards upto 765kV.HISAC Ultima can carry out Dynamic Contact Resistance Measurement on SIX breaks of THREE poles in one operation thereby significantly reducing stress on circuit breaker & testing downtime.It offers flexibility to create pre-programmed Test Plans including all test settings for all types of circuit breakers available in a switchyard that can simply be recalled at the time of actual testing. This saves you from doing all settings in switchyards.The analysis software offers a range of utilities which enables effective Condition Monitoring of circuit breaker by comparing present test data with previous test data and predicting future performance.
View Specifications