CFL Series – CIS

Cable Identification System: CFL CIS

Product successfully added to the Quote List

After excavation, sometimes it is confusing to identify the right cable from bunch of similar appearance cables. Cable identification is very important for safety of field personnel – Cutting a wrong cable can be fatal. So, we require a Cable Identification System having current direction facility to identify the wanted cable.Cable Identification is the most critical and safety related sequence during all the procedure of cable fault location. The correct identification of a cable out of a bundle of cables, where most of them can be cables in service, has to be carried out not only carefully, but also by means of an instrument widely eliminating the possibility of human error or misinterpretation.The Cable Identification System, CFL CIS from SCOPE is the ultimate solution for identifying wanted cable from a bunch of cables in a trench, pit or cable rack. The SCOPE’s Cable Identification System CFL CIS is designed to fulfill these most important safety aspects.

Key Features & Capabilities

User Friendly LED Indication for Right & Wrong Cable Identification from multiple cables
Flexible coil is thin, flexible for easy insertion between closely mounted conductors or where access is restricted and provided with locking facility for contact firmness
Two different ranges of pulse current which enables the accurate Cable Identification in all types power cables
10 Stages Amplifier Setting for Better Signal Receiving
Operation Via both Mains Supply and Internal Li-Ion Rechargeable battery
Compact, Light Weight, water resistant and dust proof design
Belt arrangement for receiver to easy carrying
User friendly and simple operation

TECHNICAL DATA

Full Product Specifications

Parameters	CFL CIS
Pulse Voltage	55VDC / 36VDC
Pulse Current	100A / 60A
Pulse Sequence	30 pulses/ min, User configurable
Pulse Width	72ms
Power Supply	100 to 265 VAC 50/60Hz
Battery	11.1 V Li-ion Rechargeable Battery
Operating Time	6 Hours
Weight	6 Kg approx.
Dimension	339mm x 295mm x 152 mm
Environmental	-20°C to +55 °C, 95% RH(Non-Condensing)

Parameters	CFL CIS-R
Display Type	LED scale
Flexible Clamp	150mm Diameter
Sensitivity	100% at 31.25Ω loop resistance
Amplifier Setting	10 stages
Battery	11.1 V Li-ion Rechargeable Battery
Operating Time	8 Hours
Weight	0.7 Kg approx.
Dimension	210mm x 124mm x 51 mm
Environmental	-20°C to +55 °C, 95% RH(Non-Condensing)

Related Products

Compact meter for photovoltaic systems up to 1000 VThe Sonel PVM-1021 meter is a compact photovoltaic system meter with a substantial number of measurement functions. The functions are selected with a rotary switch. Additional parameters are set with buttons located on the housing. All buttons and the graphic display are backlit, which greatly facilitates operation in shaded places, e.g. when taking measurements under ground-mounted PV systems. Large memory significantly shortens preparation of documents after the measurement.

Professional meter for photovoltaic installations up to 1500 VThe PVM-1530 is a pioneering meter for photovoltaic installations up to 1500 V with such a substantial number of measurement functions. It can be used for category 1 measurements according to EN 62446-1. It allows the measurement of the I-U curve for category 2 according to EN 62446-1. Furthermore, it also converts measured parameters into STC conditions according to EN IEC 60891. Comprehensive, yet simple to use, it flawlessly performs its tasks in monitoring the safety and efficiency parameters of photovoltaic (PV) installations.

Multifunctional analyzer EVSE-100 is an instrument dedicated to diagnostics of electric vehicle charging stations and cables. Using a single device, we will perform a set of tests on these objects, ending with the generation of a professional report. Through appropriate simulation of CP and PP circuits, the meter can put the station into various operating states. This allows us to verify the correctness of the control system and perform measurements in the field of electric shock protection. We can complete the verification of functionality and safety by simulating errors on the power supply side, i.e. the charging station (ICCB), and charging side of the vehicle (CP circuit)

HPT Series Hi-Pot Test Sets is available in three different combinations, viz., Power Frequency AC, DC and AC-DC Combined HV Test Sets for testing of transformers, motors, insulators, cables etc. Further, these test sets are capable of giving continuously variable HV from zero to maximum rated output voltage.HPT Series testers are specifically designed for safe and accurate measurement of leakage current to evaluate insulation integrity. These testers are moveble, one end ground test systems, ideal for HV testing. Accurate leakage measurements are ensured by placing the current meter in the return path of the HV. Years of Design, engineering and manufacturing experience have made our HPT testers the most durable, easily operated and the best designed sets in the segment. The product has been designed considering the importance of safety of the operator. The kit has various interlock to avoid any kind of accident while doing the high voltage testing.