HISAC Swift

Circuit Breaker Operational Analyser

SCOPE offers HISAC Swift – Circuit Breaker Operational Analyser for checking the performance of the circuit breakers. The Analyser contains various intelligent measuring modules designed for measuring parameters such as contact timings of Main, PIR & Auxiliary Contacts, Close & Trip Coil Current characteristics and Static Contact Resistance of three poles simultaneously. The results can be directly viewed on the TFT touch screen display in graphical as well as numerical form. It is possible to print the graph on built-in thermal printer or download record to computer for further analysis on CPLOT software. All these facilities in one instrument make it best suited for gang operated CBs.
  • Operations: C, O, C-O, O-C, O-C-O with configurable delays and Static Contact Resistance
  • When Setup manu is invoked through the touch-screen keyboard, it is possible to access saved system settings and data of Breaker under test
  • Contact Timing: Channels for 3 Main, 3 PIR & 2 Auxiliary (Wet / Dry) Contacts with 05mS resolution
  • Coil Current: One internal channel to measure Close and Trip coil current
  • Three multiplexed channels to measure Static Contact Resistance up to 2Ω with resolution of 1μΩ
  • TFT color graphical display with touch screen displays test settings, numerical & graphical test results with full resolution
  • Printout through inbuilt, 58mm thermal printer for printing test header, graph and calculations
  • Provided with in-built memory to store up to 100 records
  • WindowsTMbased CPLOT software to download the record to computer through USB connectivity for further analysis & storage
  • Type Tested as per IEC 60068-2, IEC 61326-1 & IEC 61010-1. CE marked

TECHNICAL DATA

Full Product Specifications

SpecificationsBreaker Control : Two solid state contacts rated at 50A, 300V AC/DC for breaker operation
ChannelsConfigurationRangeResolutionAccuracy
Contact Timing Channels6 : 1 Main + 1 PIR

per pole, 3 poles

Simultaneously

Measurement duration

1mS to 4S @ 1kC,

0.05mS to 200mS @ 20kC

1mS @ 1kC

0.05mS @ 20kC

Value ± 0.05%

± resolution

Auxiliary Contact Timing

Channels

 

2 : Dry / Wet Selectable

15 to 300V DC

(for Wet Channels)

1mS @ 1kC

0.05mS @ 20kC

Value ± 0.05%

± resolution

Coil Current

Channel

1 : Trip / Close coil current1, 2, 5, 10, 25, 50 A DC0.1% of selected rangeValue ± 1%

± resolution

Contact Res.

Channels

3 : Multiplexed 3 Channels.

10 A Max.

200μΩ,             2000μΩ,          20mΩ,

200mΩ & 2Ω – Auto ranging

0.1μΩ @ 200μΩValue ± 2%

± 5 x resolution

  • Sampling Speed : 20kC, 10kC, 5kC, 2kC & 1kC, selectable
  • Plot Length : 200mS at 20kC, 400mS at 10kC, 800mS at 5kC, 2000mS at 2kC and 4000mS at 1kC
  • Display : 320 x 240 pixel, 7” colour TFT LCD with touch screen
  • Printer : 58 mm paper width, in-built thermal printer
  • Environment : 0 to 50°C, 95% RH (non condensing)
  • Power : 94 – 264 V AC, 50/60 Hz ± 10%, 110 VA

Related Products

The AR700 measures acoustic signals with multiple relocatable acoustic sensors mounted on the transformer. The software determines the defect location using the time difference of all incoming signals. Finally, these coordinates are shown in a 3D model of the transformer.AR700 device is used for measuring of acoustic signals on the external surfacesof gas-insulated switchgears, power transformers and other grounded tank high-voltage equipment.The acoustic signals are caused by partial discharges in the insulation, which is the site of the defects.The advantage of AR700 device is the quick installation of the relocatable acoustic PD sensors on the grounded external surface of high-voltage equipment. The sensors have magnetic holders thus making it unnessary to de-energize the equipment for the sensors installation.AR700 device has 4 synchronic channels for acoustic signal measurement. This gives the possibility not only to detect defects in the insulation, but also to locate them. The 3D location function of the AR700 device is unique for acoustic devices.
CFL PP series is suitable for pin-pointing of fault location as well as route tracing of any type of cable. For pinpointing it is used along with CFL SG Series Surge Generators and for route tracing it is used along-with CFL AG Series Audio Frequency Generators.
SCOPE offers its hugely popular CRM series Contact Resistance Meters,CRM 100B/100B+, CRM 200B/200B+ and CRM 100C in all new super-light avatars. The Plus (+) series is based on cutting-edge ultra capacitor technology.CRM directly measures micro-ohm values at 100A / 200A DC under live EHV / UHV switchyard conditions quickly & accurately.
The ultimate solution for testing Loco Circuit Breakers of all types & makes. CBSCOPE checking the dynamic performance of Single bottle, Double bottle & Loco VCBs.