Facebook Instagram Youtube Envelope
  • +603-6141 8364
  • info@shamawar.com.my
  • Kota Damansara, Selangor
Get Quote
LV Arrester
LV Arrester - Image 2
LV Arrester - Image 3

LV Arrester

low voltage power lines or junction boxes with voltages up to 1 kV

 

Low voltage metal oxide surge arresters with a silicone housing NNO and MOSPO are designed for installation in low voltage power lines or junction boxes with voltages up to 1 kV.They serve as the initial level of protection against surges and other transients. The varistors of low voltage surge arresters NNO and MOSIPO are directly molded by silicone rubber, providing them with a high level of ingress protection rated at IP 67.

IZOELEKTRO_catalogue-LV-Arrester-16-21

TECHNICAL DATA

Full Product Specifications

  • Brand : Izoelektro
  • Model : NNO, MOSIPO
  • Voltage levels: 275 V, 280 V, 360 V, 440 V, 690 V
  • Earthing conductor: H07V-K 6 mm2
  • Ambient temperature range: T = -60 °C … +85 °C
  • Ingress protection level: IP 67
  • Response time: tA < 25 ns
  • Housing: silicone rubber
  • Silicone colour: grey
  • IEC class: II
  • Tested according to standards: IEC 61643-1 and IEC 61643-11a

Related Products

Pre-formed Grip

The helically preformed grip is used to hold/pull/tension the galvanized steel stay wire in the installation of the 33/22/11 kV overhead line systems such as pole and tower.
View Specifications

Pole Accessories for Telecomunication and Electrical Distribution

Our products have been used in the telecom and electrical industry since our inception in 1997. These products are still in operation since their installation, which reflects the quality and robustness of these products.We have local facility for metal stamping, shearing, punching, drilling, welding and assembly. Product coating used is hot dip galvanized that comply to BS EN 1461.For Telecommunication we have Eye bolt, clamp pole iron, clamp terminating , clamp pole concrete, clamp pole headring pole iron and pole concrete, thimble open small, stay rod set, stay plate, Hook clamp IB no 1 & no 2, Integral Bearer Clamp no 1 & no 2 and bridle ring
View Specifications

Insulated Piercing Connector (IPC) Holder

MODEL : IPCH-01

Insulating Piercing Connector Holder, IPCH-01 made from Aluminum Alloy high grade Tool was tested according to NFC 033-020:2013 and can with stand torque up to 40kN.
  • Weight : 450 g.
  • Minimum clamping jaw: 40 mm
  • Maximum clamping opening: 70 mm
View Specifications

Insulated Piercing Connector (IPC)

IPC is used for simultaneous penetration of insulation on LV ABC conductors and for connecting of conductors for street lighting. Connector is manufactured in such way that it enables connection of LV ABC and branch conductor regardless of whether it is an aluminum or copper conductor. The body of the connector is made of Heat and UV resistant plastic and the elastomer insert eliminates the appearance of electrolytic corrosion since it prevents the appearance of moisture at contact points. The contacts are protected with electric contact grease. Mounting under voltage is possible but with mandatory use of adequate protection equipment. Ring-spanner or tubular spanner.
View Specifications