Facebook Instagram Youtube Envelope
  • +603-6141 8364
  • info@shamawar.com.my
  • Kota Damansara, Selangor
Get Quote
Insulated Piercing Connector (IPC) Holder
Insulated Piercing Connector (IPC) Holder - Image 2
Insulated Piercing Connector (IPC) Holder - Image 3
Insulated Piercing Connector (IPC) Holder - Image 4
Insulated Piercing Connector (IPC) Holder - Image 5

Insulated Piercing Connector (IPC) Holder

for live maintenance work up to 1kVAC and 1.5kVDC

MODEL : IPCH-01

Insulating Piercing Connector Holder, IPCH-01 made from Aluminum Alloy high grade Tool was tested according to NFC 033-020:2013 and can with stand torque up to 40kN.
  • Weight : 450 g.
  • Minimum clamping jaw: 40 mm
  • Maximum clamping opening: 70 mm

Related Products

Shackle Insulator

Shackle Insulator

An insulator that is used in distribution networks that works with low voltage is known as a shackle insulator. This insulator is also known as a spool insulator. These insulators can be worked in two positions like horizontal otherwise vertical. 
View Specifications

Pre-formed Grip

The helically preformed grip is used to hold/pull/tension the galvanized steel stay wire in the installation of the 33/22/11 kV overhead line systems such as pole and tower.
View Specifications

Neutral Link

Neutral link 100A was designed for continuous operation on a 3-phase, 415V, 50 Hz multiple neutral earthed system.Housing Made from weather and UV resistant, fire retardant insulating material. A hole/slot each at the top and bottom.Manufactured in 2 parts i.e., top cover and base molding. Sealing provided to seal the top cover to the base Base moldingTerminal Block Connector Design with a hole Internal Diameter = 9mm, at least 2 pinching screws/stud of 8mm(M8) per hole, with incoming and outgoing hole. Inner side of hole is with threaded.Pinching screw and terminal shall made of tin plated brass. Pinching screw and terminal shall be electro- tin plated in accordance to BS 1872. Filled sufficient quantity of electrical conductive oxide inhibiting compound.
View Specifications

Insulated Piercing Connector (IPC)

IPC is used for simultaneous penetration of insulation on LV ABC conductors and for connecting of conductors for street lighting. Connector is manufactured in such way that it enables connection of LV ABC and branch conductor regardless of whether it is an aluminum or copper conductor. The body of the connector is made of Heat and UV resistant plastic and the elastomer insert eliminates the appearance of electrolytic corrosion since it prevents the appearance of moisture at contact points. The contacts are protected with electric contact grease. Mounting under voltage is possible but with mandatory use of adequate protection equipment. Ring-spanner or tubular spanner.
View Specifications