CSJT Cold-shrink Joint with Resin Injection for XLPE Cables up to 36 kV

FEATURES

The tape and resin outer sealing and
protection system provides a reliable
moisture seal, corrosion prevention and
effective impact resistance;
Pre-expanded, single piece silicone
rubber joint body with high mechanical
expansion capability allows a wide
application range;
Electrical stress control of the screen
cut area by integrated conductive
geometrical stress cones;
Electrical stress control of the connector
area by an integrated screened
connection area (Farada cage)

TECHNICAL DATA

Full Product Specifications

APPLICATIONS

Suitable for polymeric armoured and
unarmoured cables;
Hard-elastic polyurethane-type
rejacketing with excellent insulation
properties, hydrolytic stability and
hydrophobic characteristics for
undergrond applications

Related Products

Suspension clamp PS 1500 is designed to suspend LV ABC with insulated neutral messenger of cross-section between 16 mm² and 71,5 mm². It is resistant to environmental and mechanical effects and UV radiation since it is made of material of high tensile strength and stable structure. Suspension clamp allowsturning angle of 30/60°. It is installed using no tools and does not contain parts which can fall off during installation.
Photo Electric Control Unit (PECU) is an electronic switch which is triggered at a specific light level. Based on thermal, electronic or microprocessor technology, photocells operate in a number of ways depending of the level of accuracy required.Dusk to dawn sensing – generally inaccurate light detection where the lamp switches ‘ON’ as night falls and switches ‘OFF’ shortly after sunrise.Light level detection – more accurate light detection where the photocell switches at pre-set light levels both at sunset and sunrise, typically 70/35, 55/28, 35/18 or 20/20 lux. Negative switching sets the lamp to ‘OFF’ at a lower level than ‘ON’, with positive switching acting in reverse.