CSJT Cold-shrink Joint with Resin Injection for XLPE Cables up to 36 kV

FEATURES

The tape and resin outer sealing and
protection system provides a reliable
moisture seal, corrosion prevention and
effective impact resistance;
Pre-expanded, single piece silicone
rubber joint body with high mechanical
expansion capability allows a wide
application range;
Electrical stress control of the screen
cut area by integrated conductive
geometrical stress cones;
Electrical stress control of the connector
area by an integrated screened
connection area (Farada cage)

TECHNICAL DATA

Full Product Specifications

APPLICATIONS

Suitable for polymeric armoured and
unarmoured cables;
Hard-elastic polyurethane-type
rejacketing with excellent insulation
properties, hydrolytic stability and
hydrophobic characteristics for
undergrond applications

Related Products

• Composite Cable Joint Tray is an accessory for MV ABC system and designed to hold and support the 11 kV and 33kV ABC straight through joints on 10m-19-Skn spun concrete poles. • Capable of withstanding a minimum load of 100 kilograms. • Secure Of aluminium conductor joint is with cable ties or cable cleats (optional)
Neutral link 100A was designed for continuous operation on a 3-phase, 415V, 50 Hz multiple neutral earthed system.Housing Made from weather and UV resistant, fire retardant insulating material. A hole/slot each at the top and bottom.Manufactured in 2 parts i.e., top cover and base molding. Sealing provided to seal the top cover to the base Base moldingTerminal Block Connector Design with a hole Internal Diameter = 9mm, at least 2 pinching screws/stud of 8mm(M8) per hole, with incoming and outgoing hole. Inner side of hole is with threaded.Pinching screw and terminal shall made of tin plated brass. Pinching screw and terminal shall be electro- tin plated in accordance to BS 1872. Filled sufficient quantity of electrical conductive oxide inhibiting compound.
IPC is used for simultaneous penetration of insulation on LV ABC conductors and for connecting of conductors for street lighting. Connector is manufactured in such way that it enables connection of LV ABC and branch conductor regardless of whether it is an aluminum or copper conductor. The body of the connector is made of Heat and UV resistant plastic and the elastomer insert eliminates the appearance of electrolytic corrosion since it prevents the appearance of moisture at contact points. The contacts are protected with electric contact grease. Mounting under voltage is possible but with mandatory use of adequate protection equipment. Ring-spanner or tubular spanner.