Facebook Instagram Youtube Envelope
  • +603-6141 8364
  • info@shamawar.com.my
  • Kota Damansara, Selangor
Get Quote
Shackle Insulator
Shackle Insulator - Image 2
Shackle Insulator - Image 3
Shackle Insulator - Image 4

Shackle Insulator

Shackle & Stay Insulator for LV Distribution Networks

Shackle Insulator

An insulator that is used in distribution networks that works with low voltage is known as a shackle insulator. This insulator is also known as a spool insulator. These insulators can be worked in two positions like horizontal otherwise vertical. 
Applications of Shackle Type Insulators

The applications of this insulator include the following.

  • It is used in a distribution system by arranging in between tower & conductors to support & insulate.
  • These insulators are used in overhead lines with low & medium voltage.
  • This insulator is used with a bolt by placing on the pole otherwise telegraph to avoid outflow current from conductors
  • It can be used in both positions like horizontal & vertical position.

Stay Insulator

The stay insulator is another kind of insulators with low voltage. It used to balance and fasten pole terminal through integrating the guy wires and guy grips. They have the structure to protecting main wire from accidentally electrical conduction.

TECHNICAL DATA

Full Product Specifications

Related Products

Photo Electric Control Unit

Photo Electric Control Unit (PECU) is an electronic switch which is triggered at a specific light level. Based on thermal, electronic or microprocessor technology, photocells operate in a number of ways depending of the level of accuracy required.Dusk to dawn sensing – generally inaccurate light detection where the lamp switches ‘ON’ as night falls and switches ‘OFF’ shortly after sunrise.Light level detection – more accurate light detection where the photocell switches at pre-set light levels both at sunset and sunrise, typically 70/35, 55/28, 35/18 or 20/20 lux. Negative switching sets the lamp to ‘OFF’ at a lower level than ‘ON’, with positive switching acting in reverse.
View Specifications

Pole Accessories for Telecomunication and Electrical Distribution

Our products have been used in the telecom and electrical industry since our inception in 1997. These products are still in operation since their installation, which reflects the quality and robustness of these products.We have local facility for metal stamping, shearing, punching, drilling, welding and assembly. Product coating used is hot dip galvanized that comply to BS EN 1461.For Telecommunication we have Eye bolt, clamp pole iron, clamp terminating , clamp pole concrete, clamp pole headring pole iron and pole concrete, thimble open small, stay rod set, stay plate, Hook clamp IB no 1 & no 2, Integral Bearer Clamp no 1 & no 2 and bridle ring
View Specifications

LV Arrester

Low voltage metal oxide surge arresters with a silicone housing NNO and MOSPO are designed for installation in low voltage power lines or junction boxes with voltages up to 1 kV.They serve as the initial level of protection against surges and other transients. The varistors of low voltage surge arresters NNO and MOSIPO are directly molded by silicone rubber, providing them with a high level of ingress protection rated at IP 67.
View Specifications

Insulated Piercing Connector (IPC)

IPC is used for simultaneous penetration of insulation on LV ABC conductors and for connecting of conductors for street lighting. Connector is manufactured in such way that it enables connection of LV ABC and branch conductor regardless of whether it is an aluminum or copper conductor. The body of the connector is made of Heat and UV resistant plastic and the elastomer insert eliminates the appearance of electrolytic corrosion since it prevents the appearance of moisture at contact points. The contacts are protected with electric contact grease. Mounting under voltage is possible but with mandatory use of adequate protection equipment. Ring-spanner or tubular spanner.
View Specifications