CSTI/CSTO Cold-shrink Termination with Integrated Stress Control for XLPE Cables up to 24 kV

FEATURES

Pre-expanded termination body with
integrated stress control;
The extra-long silicone stress cone
is integrated with the termination
and reduces positioning switchgear
connection systems;
Accommodates mechanical lug
and compression lug

TECHNICAL DATA

Full Product Specifications

APPLICATIONS

Suitable for indoor and outdoor use;
25 – 630 mm2 conductor size

Related Products

Photo Electric Control Unit (PECU) is an electronic switch which is triggered at a specific light level. Based on thermal, electronic or microprocessor technology, photocells operate in a number of ways depending of the level of accuracy required.Dusk to dawn sensing – generally inaccurate light detection where the lamp switches ‘ON’ as night falls and switches ‘OFF’ shortly after sunrise.Light level detection – more accurate light detection where the photocell switches at pre-set light levels both at sunset and sunrise, typically 70/35, 55/28, 35/18 or 20/20 lux. Negative switching sets the lamp to ‘OFF’ at a lower level than ‘ON’, with positive switching acting in reverse.
Our products have been used in the telecom and electrical industry since our inception in 1997. These products are still in operation since their installation, which reflects the quality and robustness of these products.We have local facility for metal stamping, shearing, punching, drilling, welding and assembly. Product coating used is hot dip galvanized that comply to BS EN 1461.For Telecommunication we have Eye bolt, clamp pole iron, clamp terminating , clamp pole concrete, clamp pole headring pole iron and pole concrete, thimble open small, stay rod set, stay plate, Hook clamp IB no 1 & no 2, Integral Bearer Clamp no 1 & no 2 and bridle ring
  • ANSI C119.4, full tension, Class A connector (95% of conductor breaking strength unless otherwise noted)
  • Color coded end funnel guides for easy identification
  • Factory inhibitor protected
  • Fastest method of splicing aluminum, aluminum alloy and ACSR conductor
IPC is used for simultaneous penetration of insulation on LV ABC conductors and for connecting of conductors for street lighting. Connector is manufactured in such way that it enables connection of LV ABC and branch conductor regardless of whether it is an aluminum or copper conductor. The body of the connector is made of Heat and UV resistant plastic and the elastomer insert eliminates the appearance of electrolytic corrosion since it prevents the appearance of moisture at contact points. The contacts are protected with electric contact grease. Mounting under voltage is possible but with mandatory use of adequate protection equipment. Ring-spanner or tubular spanner.