Smart POLE for Smart City

Smart poles are an evolution of traditional streetlights, serving as modular hubs for smart city technologies. They combine energy-efficient LED lighting with IoT devices, environmental sensors, cameras, displays, and communication modules to collect and transmit data for urban management By centralizing multiple functions, smart poles reduce infrastructure redundancy and optimize city operations.

  • Solar PV panel Daylight to DC —allows off-grid operation
    where the road is not yet wired
  • LED luminaire + lamp controller
    NEMA 7-pin or Zhaga socket · 0–10 V, PWM
    or DALI dimming · per-lamp switching
  • CCTV / PTZ camera
    Pan, tilt and optical zoom · IP66 housing ·
    traffic and incident monitoring
  • Wi-Fi AP · IoT gateway
    Public access point and the edge controller
    that aggregates every device on the pole
  • Loudspeaker · emergency alarm
    IP66 column speaker for evacuation,
    weather and security announcements
  • Emergency SOS button
    One-touch two-way intercom at hand
    height —no phone, no unlock, no dialling
  • Breaker · SPD · fibre termination Inside the door —remote-trip breaker,
    surge protection and the fibre demarcation

Related Products

SNV-EFI earth fault indicator, it Widely used in various ring cabinets, high/ Medium or low -voltage switch gear and cable branch box in power system, can accurately and reliably detect the fault section and fault type ofpower grid in the Low/medium voltage network. The use of cable type grounding fault indicator is an efficient way to check cable fault, and is an effective way to improve the operation level of distribution network and theefficiency of fault handling. The design uses electromagnetic induction, and single chip microcomputer control technology to make fault alarm with high accuracy and strong anti-interference ability
PLC NETWORK  DIAGNOSTIC TOOLS  –A.K.A PLC CLEANERSince 2001, our technical partner has been dealing with both, the design of PLC communication modems, and their subsequent implementation. Due to this, these products incorporate procedures that provide information on the quality of the received signal, the state of the communication path, and other diagnostic variables such as phase monitoring (recognizing whether it is the phase to which the opposite modem is transmitting or whether it is signal received by crosstalk in the cable line).As part of the PLC Cleaner solution, these modems are used for communication on low-voltage distribution systems, they are able to detect even the “bottlenecks” of the communication channel and, subsequently, recommend how to remove them. The big advantage of this solution is that it does not matter what standard (G3-PLC, PRIME, OSGP, METERS AND MORE, IDIS…) is deployed in a given location and there is no need to manipulate already installed electricity meters.