Shackle & Stay Insulator

Shackle & Stay Insulator for LV Distribution Networks

Shackle Insulator

An insulator that is used in distribution networks that works with low voltage is known as a shackle insulator. This insulator is also known as a spool insulator. These insulators can be worked in two positions like horizontal otherwise vertical. 
Applications of Shackle Type Insulators

The applications of this insulator include the following.

  • It is used in a distribution system by arranging in between tower & conductors to support & insulate.
  • These insulators are used in overhead lines with low & medium voltage.
  • This insulator is used with a bolt by placing on the pole otherwise telegraph to avoid outflow current from conductors
  • It can be used in both positions like horizontal & vertical position.

Stay Insulator

The stay insulator is another kind of insulators with low voltage. It used to balance and fasten pole terminal through integrating the guy wires and guy grips. They have the structure to protecting main wire from accidentally electrical conduction.

TECHNICAL DATA

Full Product Specifications

Related Products

Suspension clamp PS 1500 is designed to suspend LV ABC with insulated neutral messenger of cross-section between 16 mm² and 71,5 mm². It is resistant to environmental and mechanical effects and UV radiation since it is made of material of high tensile strength and stable structure. Suspension clamp allowsturning angle of 30/60°. It is installed using no tools and does not contain parts which can fall off during installation.
Photo Electric Control Unit (PECU) is an electronic switch which is triggered at a specific light level. Based on thermal, electronic or microprocessor technology, photocells operate in a number of ways depending of the level of accuracy required.Dusk to dawn sensing – generally inaccurate light detection where the lamp switches ‘ON’ as night falls and switches ‘OFF’ shortly after sunrise.Light level detection – more accurate light detection where the photocell switches at pre-set light levels both at sunset and sunrise, typically 70/35, 55/28, 35/18 or 20/20 lux. Negative switching sets the lamp to ‘OFF’ at a lower level than ‘ON’, with positive switching acting in reverse.