CFL Series – CIS

Cable Identification System: CFL CIS

After excavation, sometimes it is confusing to identify the right cable from bunch of similar appearance cables. Cable identification is very important for safety of field personnel – Cutting a wrong cable can be fatal. So, we require a Cable Identification System having current direction facility to identify the wanted cable.Cable Identification is the most critical and safety related sequence during all the procedure of cable fault location. The correct identification of a cable out of a bundle of cables, where most of them can be cables in service, has to be carried out not only carefully, but also by means of an instrument widely eliminating the possibility of human error or misinterpretation.The Cable Identification System, CFL CIS from SCOPE is the ultimate solution for identifying wanted cable from a bunch of cables in a trench, pit or cable rack. The SCOPE’s Cable Identification System CFL CIS is designed to fulfill these most important safety aspects.
  • User Friendly LED Indication for Right & Wrong Cable Identification from multiple cables
  • Flexible coil is thin, flexible for easy insertion between closely mounted conductors or where access is restricted and provided with locking facility for contact firmness
  • Two different ranges of pulse current which enables the accurate Cable Identification in all types power cables
  • 10 Stages Amplifier Setting for Better Signal Receiving
  • Operation Via both Mains Supply and Internal Li-Ion Rechargeable battery
  • Compact, Light Weight, water resistant and dust proof design
  • Belt arrangement for receiver to easy carrying
  • User friendly and simple operation

TECHNICAL DATA

Full Product Specifications

ParametersCFL CIS
Pulse Voltage55VDC / 36VDC
Pulse Current100A / 60A
Pulse Sequence30 pulses/ min, User configurable
Pulse Width72ms
Power Supply100 to 265 VAC 50/60Hz
Battery11.1 V Li-ion Rechargeable Battery
Operating Time6 Hours
Weight6 Kg approx.
Dimension339mm x 295mm x 152 mm
Environmental-20°C to +55 °C, 95% RH(Non-Condensing)

 

ParametersCFL CIS-R
Display TypeLED scale
Flexible Clamp150mm Diameter
Sensitivity100% at 31.25Ω loop resistance
Amplifier Setting10 stages
Battery11.1 V Li-ion Rechargeable Battery
Operating Time8 Hours
Weight0.7 Kg approx.
Dimension210mm x 124mm x 51 mm
Environmental-20°C to +55 °C, 95% RH(Non-Condensing)

Related Products

This is an ‘All in One’ solution for detection, analysis & localisation of partial discharges in the insulation of high-voltage Transformers, Cables, GIS, Generators and Motors.The PD Analyser is an extremely useful device for condition estimation of high-voltage insulation. This multi-purpose device is designed for
  • Partial discharge measuring in high-voltage insulation at a high noise level
  • PD detection & identtification of various types of defects for effective insulation condition estimation
SIM Filter is a passive filter which uses energy of surge generator for stabilizing the SIM Filter, CFL SIMF works in conjunction with SCOPE’s Cable Fault Pre Locator CFL Cable Fault Surge Generator, CFL SG Series, up to 16kV
Audio Frequency Generator has been designed to be used for cable route tracing, pin-pointing of low resistance welded faults, joint location and cable identification.
The ultimate solution for testing Loco Circuit Breakers of all types & makes. CBSCOPE checking the dynamic performance of Single bottle, Double bottle & Loco VCBs.