Product - Page 2 of 7 - Shamawar Group of Companies

SCOPE offers its hugely popular CRM series Contact Resistance Meters,CRM 100B/100B+, CRM 200B/200B+ and CRM 100C in all new super-light avatars. The Plus (+) series is based on cutting-edge ultra capacitor technology.CRM directly measures micro-ohm values at 100A / 200A DC under live EHV / UHV switchyard conditions quickly & accurately.

Fluke 83V and 87V Digital Multimeters is For all detailed specifications.Accuracy is given as ±([% of reading] + [number of least significant digits]) at 18 °C to 28 °C, with relative humidity up to 90 %, for a period of one year after calibration. For Model 87 in the 41⁄2-digit mode, multiply the number of least significant digits (counts) by 10. AC conversions are ac-coupled and valid from 3 % to 100 % of range. Model 87 is true-rms responding. AC crest factor can be up to 3 at full scale, 6 at half scale. For non-sinusoidal wave forms add -(2 % Rdg + 2 % full scale) typical, for a crest factor up to 3.

SCOPE offers Dir CT, a CT Polarity Tester specially designed to verify correctness of polarity of current transformer cores in live EHV / UHV switch-yards. Polarity test is one of the most common yet crucial tests required to be conducted on current transformers at the time of manufacturing, site commissioning & maintenance.

SNV-EFI earth fault indicator, it Widely used in various ring cabinets, high/ Medium or low -voltage switch gear and cable branch box in power system, can accurately and reliably detect the fault section and fault type ofpower grid in the Low/medium voltage network. The use of cable type grounding fault indicator is an efficient way to check cable fault, and is an effective way to improve the operation level of distribution network and theefficiency of fault handling. The design uses electromagnetic induction, and single chip microcomputer control technology to make fault alarm with high accuracy and strong anti-interference ability

Designed for maximum design flexibility and speed of installation while bypassing damaged transmission towers, performing line maintenance, and in moving or supporting lines during construction projects. Key features include:

Almost 2x the buckling load capacity compared to narrower profile structures.
All components weigh less than 100kg, simplifying transport by hand to remote or hard to access.
Line Crew Safety features including flat climbing surfaces, compatibility with all commercially available fall arrest systems, and four‐man single level access.
Welded aluminum construction eliminates concern of corrosion regardless of environment or repeated use.
Compatible with hand, crane, and helicopter installation methods.
Store and transport in standard 20‐foot containers.

EV Charging Stations
Parking Facilities
Highway Charging Hubs
Fast Charging Support
Renewable Energy Integration

Multifunctional analyzer EVSE-100 is an instrument dedicated to diagnostics of electric vehicle charging stations and cables. Using a single device, we will perform a set of tests on these objects, ending with the generation of a professional report. Through appropriate simulation of CP and PP circuits, the meter can put the station into various operating states. This allows us to verify the correctness of the control system and perform measurements in the field of electric shock protection. We can complete the verification of functionality and safety by simulating errors on the power supply side, i.e. the charging station (ICCB), and charging side of the vehicle (CP circuit)

SCOPE offers HISAC Swift – Circuit Breaker Operational Analyser for checking the performance of the circuit breakers. The Analyser contains various intelligent measuring modules designed for measuring parameters such as contact timings of Main, PIR & Auxiliary Contacts, Close & Trip Coil Current characteristics and Static Contact Resistance of three poles simultaneously. The results can be directly viewed on the TFT touch screen display in graphical as well as numerical form. It is possible to print the graph on built-in thermal printer or download record to computer for further analysis on CPLOT software. All these facilities in one instrument make it best suited for gang operated CBs.

HISAC Ultima – Circuit Breaker Dynamic Test System from SCOPE. The ultimate solution for testing Circuit Breakers of all types. HISAC Ultima is the complete analyser for checking the dynamic performance of circuit breakers in live EHV switchyards upto 765kV.HISAC Ultima can carry out Dynamic Contact Resistance Measurement on SIX breaks of THREE poles in one operation thereby significantly reducing stress on circuit breaker & testing downtime.It offers flexibility to create pre-programmed Test Plans including all test settings for all types of circuit breakers available in a switchyard that can simply be recalled at the time of actual testing. This saves you from doing all settings in switchyards.The analysis software offers a range of utilities which enables effective Condition Monitoring of circuit breaker by comparing present test data with previous test data and predicting future performance.

HISAC Ultima – new generation Circuit Breaker Dynamic Test Set from SCOPE …. The ultimate solution for testing Circuit Breakers of all types. HISAC Ultima is the most complete analyser for checking the dynamic performance of CBs in live EHV switchyards upto 765 kV.HISAC Ultima can carry out Dynamic Contact Resistance Measurement on SIX breaks of THREE poles in one operation thereby significantly reducing stress on CB & testing downtime.HISAC Ultima with DCRM+ ensures end users safety by providing Dual Earth Test, in which Circuit Breaker will be grounded from both sides while conducting the test.It offers flexibility to create pre-programmed Test Plans including all test settings for all types of circuit breakers available in a switchyard that can simply be recalled at the time of actual testing. This saves you from doing all settings in switchyards.The Analysis software offers a range of utilities which enables effective Condition Monitoring of CB by comparing present test data with previous signatures and predicting future performance.

Modular Expansion
Remote Monitoring
Lithium Iron Phosphate Technology
Long Service Life

HPT Series Hi-Pot Test Sets is available in three different combinations, viz., Power Frequency AC, DC and AC-DC Combined HV Test Sets for testing of transformers, motors, insulators, cables etc. Further, these test sets are capable of giving continuously variable HV from zero to maximum rated output voltage.HPT Series testers are specifically designed for safe and accurate measurement of leakage current to evaluate insulation integrity. These testers are moveble, one end ground test systems, ideal for HV testing. Accurate leakage measurements are ensured by placing the current meter in the return path of the HV. Years of Design, engineering and manufacturing experience have made our HPT testers the most durable, easily operated and the best designed sets in the segment. The product has been designed considering the importance of safety of the operator. The kit has various interlock to avoid any kind of accident while doing the high voltage testing.

Our Products

CRM Series (CRM 100B/100B+, CRM 200B/200B+ & CRM 100C)

Digital Multimeter

Dir CT

Earth Fault Indicator (EFI)

Emergency Restoration System (ERS)

EV Charging Energy Storage System

EVSE-100

HISAC Swift

HISAC Ultima

HISAC Ultima with DCRM+

Home Energy Storage System

HPT Series